Easy to use by daylight or in the darkest night, the Pulsar Digisight N750 Night Vision Rifle Scope incorporates top-flight technology and the most advanced electronics and optics available. The Pulsar N750 Riflescope w/ IR Flashlight features a Sum Light function that automatically raises the sensitivity of the CCD array when light is low, keeping your view crisp even when it's darkest out. A built-in infrared illuminator with 3 power levels makes the Pulsar Digisight N750 4.5-6.75x 50mm Rifle Scope usable even when there's no ambient light available, illuminating targets of any size at a considerable distance. The Pulsar N750 Night Vision Scope is no slouch on the optics and mechanical ends, either. The scope gets you on target faster with its one-shot zeroing method, and gives you a generous 67mm of eye relief and a 50 mm focusable lens. This great Night Vision Scope also features a high-power digital zoom capable of increasing the magnification from 4.5x to 6.75x. Combined with the powerful detection range of up to 600 meters, this makes the Pulsar Digisight N750 NV Riflescope an ideal sight for Short-range nighttime shooting.
Pulsar PL76312: Digisight N750 Digital Night Vision Riflescope
Objective Lens Diameter: 50mm
Field of view: 5 degrees angular
Eye relief: 67mm
Built-in IR flashlight: Laser 780nm
Resolutions: 55 lines per mm
Max detection range: 600m
Diopter setting: +-4 D
Close-up range: 5m
Operating voltage: 3.7V .... 6 4*AA
External power supply: DC 9V
Power consumption: 15W / 3W
Water intrusion rating (IEC 60529): IP44
Operating temperature: -20C to +50 C
Operating time with IR: 3.5 hours
Operating time without IR: 4 hours
Features of Pulsar N750 Digisight Night Vision Rifle Scope:
Superb image quality; high resolution
Long eye relief
Built-in laser IR illuminator with three-step power adjustment
Resistant to bright light exposure
Built-in and external power supply
Lightweight and durable composite housing
Intuitive easy-to-use interface
Wireless remote control
Wide range of operating temperature
Additional weaver rail for accessories
Built-in flip up objective lens cover
Windage/Elevantion Knob: Single knob (switchable between vertical and horizontal adjustments) allows better ergonomics and stable hold of the rifle during firing or sighting in the scope.
Weaver 7/8in Rail: Mil-STD 1913 rail on the side of the scope allows the use of multiple accessories including auxiliary IRs, batteries and other systems.
Quick Image Adjustment: Select the setting ideally for fitting the lighting conditions by choosing the High Contrast and/or Sum Light (Heightened light amplification) Modes.
Video Output: The Digisight N750 is equipped with a jack, enabling connection of external video recording sources. Wireless Remote Control: The Digisight N750 includes a wireless remote control with scope and IR ON/OFF and zoom functions.
Brightness and Contrast Control: Users can adjust required screen brightness and contrast. A button next to the control wheel switches brightness and contrast modes.
Built-In Laser IR Illuniator: The internal eye-safe laser IR illuminator three-step power adjustment provides artificial illumination that improves image quality under insufficient levels of natural illumination.
Reticle Inversion: This feature switches the central point of aiming reticle between red-on-gray and green-on-gray.
Screen: Choice of four operating modes; blank screen "aiming reticle" mode, "clock" mode, and 'aiming reticle & clock" mode.
Lens Cap: Built-in flip cap. The lens cap is fixed on the scope's body to prevent loss.
Powering Up: The unit and the built-in IR illuminator is carried out successively by gradually turning the slector switch.
Pulsar Digisight N750 Digital Night Vision Riflescope
Wireless remote control
Plastic case or carrying case