Spot your target at 400m with the Pulsar Digisight N770 Digital NV Riflescope. This night vision scope has a built-in IR Laser Illuminator that operates in the 915nm IR range, invisible to the unaided human eye. The Pulsar Digisight N770 Digital Night Vision Riflescope w/ Illuminated Dot T-Reticle is rugged and reliable to give you the fast response and crisp images to get your target.
Magnification: 4.5 - 6.75
Digital zoom: 1.5x
Objective Lens Diameter: 50mm
Field of view: 5° (4.5x) 3.25°(6.75)
Eye relief: 67mm
Built-in IR flashlight: Laser 915nm
Resolutions: 55 lines per mm
Max detection range: 450m
Diopter setting: +-4 D
Close-up range: 5m
Operating voltage: 3.7V .... 6 4*AA
External power supply: DC 9V
Power consumption: 15W / 3W
Water intrusion rating (IEC 60529): IP44
Operating temperature: -20C to +50 C
Operating time with IR: 3.5 hours
Operating time without IR: 4 hours
Features of Pulsar N770 Digisight Night Vision Rifle Scope:
Superb image quality; high resolution
Long eye relief
Built-in laser IR illuminator with three-step power adjustment
Resistant to bright light exposure
Built-in and external power supply
Lightweight and durable composite housing
Intuitive easy-to-use interface
Wireless remote control
Wide range of operating temperature
Additional weaver rail for accessories
Built-in flip up objective lens cover
Windage/Elevantion Knob: Single knob (switchable between vertical and horizontal adjustments) allows better ergonomics and stable hold of the rifle during firing or sighting in the scope.
Weaver 7/8in Rail: Mil-STD 1913 rail on the side of the scope allows the use of multiple accessories including auxiliary IRs, batteries and other systems.
Quick Image Adjustment: Select the setting ideally for fitting the lighting conditions by choosing the High Contrast and/or Sum Light (Heightened light amplification) Modes.
Video Output: The Digisight N750 is equipped with a jack, enabling connection of external video recording sources. Wireless Remote Control: The Digisight N750 includes a wireless remote control with scope and IR ON/OFF and zoom functions.
Brightness and Contrast Control: Users can adjust required screen brightness and contrast. A button next to the control wheel switches brightness and contrast modes.
Built-In Laser IR Illuniator: The internal eye-safe laser IR illuminator three-step power adjustment provides artificial illumination that improves image quality under insufficient levels of natural illumination.
Reticle Inversion: This feature switches the central point of aiming reticle between red-on-gray and green-on-gray.
Screen: Choice of four operating modes; blank screen "aiming reticle" mode, "clock" mode, and 'aiming reticle & clock" mode.
Lens Cap: Built-in flip cap. The lens cap is fixed on the scope's body to prevent loss.
Powering Up: The unit and the built-in IR illuminator is carried out successively by gradually turning the slector switch.
Pulsar Digisight N750 Digital Night Vision Riflescope
Plastic case or carrying case